Current Transformers

Product Details:

Here Vct is considered as the CT secondary voltage signal required to feed the AtoD converter of uC and it is assumed to be less than absolute maximum rating of input pin of AtoD converter. Kindly keep Vct = Vout below 1 Volts for accurate reading this implies that lower value of burden resistance helps increase accuracy. Using higher bit ADC increases the precision level. Kindly select at your discretion.

Features:

• Designed and developed as per European Standards IEC : 62053-21 / IS: 13779
• Current Transformer with PC Housing for better insulation and environmental protection.
• Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT.

Applications:

• Energy Meters
• Electronic Circuit Breaker
• Current Sensors
• Motor Speed Controllers

Specifications:

• Recommended Burden Resistance (Ru): 30 Ohms @ Vout = 1 Volts
• Maximum Value: 1571 Ohms. (As per Eqn. R = Vct X N / Ip 
• Recommended Burden Resistance (Ra): Maximum Value: 3273 Ohms. For Analog Interface using bridge rectifier and bulk capacitor.
• Insulation - Pri,Sec & Earth: ≥ 1000 M
• Operating & Storage Temp.: -40C ~ +85C
• Humidity: ≤90%
• Mounting Type / Housing (Optional): Self (Flying) Wire-Without Dabbi

Additional Information:

• Item Code: SET5811-5000-200A
• Production Capacity: 500000 per month

Product Details:

Features:

• Designed and developed as per European Standards IEC: 62053-21 / IS: 13779
• Current Transformer with PC Housing for better insulation and environmental protection.
• Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT

Applications:

• Energy Meters
• Electronic Circuit Breaker
• Residual Current Circuit Breakers
• Earth Leakage Current Circuit Breaker
• Current Sensors
• Motor Speed Controllers

Specifications:

• Maximum Primary Current (IL, IN): 30 Amp
• Insulation-Pri, Sec & Earth: ≥ 1000 M
• Operating & Storage Temp.: -40C ~ +85C
• Humidity: ≤90%
• Mounting Type / Housing (Optional): Self (Flying) Wire-Without Dabbi / Self (Flying) Wire-With Dabbi / PCB Mounting-With Dabbi.

Additional Information:

• Item Code: SET2615-525-30A
• Production Capacity: 500000 per month

Product Details:

Here Vct is considered as the CT secondary voltage signal required to feed the AtoD converter of uC and it is assumed to be less than absolute maximum rating of input pin of AtoD converter. Kindly keep Vct = Vout below 1 Volts for accurate reading this implies that lower value of burden resistance helps increase accuracy. Using higher bit ADC increases the precision level. Kindly select at your discretion.

 

Features:

• Designed and developed as per European Standards IEC: 62053-21 / IS: 13779
• Current Transformer with PC Housing for better insulation and environmental protection.
• Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT.

Applications:

• Energy Meters
• Electronic Circuit Breaker
• Current Sensors
• Motor Speed Controllers

Specifications:

• Recommended Burden Resistance (Ru): 75 Ohms @ Vout = 0.9 Volts
• Maximum Value: 786 Ohms. (As per Eqn. R = Vct X N / Ip )
• Recommended Burden Resistance (Ra): Maximum Value: 1637 Ohms.
• For Analog Interface using bridge rectifier and bulk capacitor.
• Insulation – Pri,Sec & Earth: ≥ 1000 M
• Humidity: ≤90%
• Mounting Type, Housing (Optional): Self (Flying) Wire-Without Dabbi, Self (Flying) Wire-With Dabbi, PCB Mounting-With Dabbi

Additional Information:

• Item Code: SET2610-2500-30A
• Production Capacity: 500000 per month

Product Details:

We are the prominent organization of this domain engaged in offering a wide spectrum of 2 AMP Current Transformer. This transformer has a panel structure that looks attractive when mounted due to its round alms. Also, it has die-cast white powder coated body available in WH/WW color. In addition, this transformer is manufactured using quality materials and advanced technology. Our professionals utilize optimum grade materials and adhering to industry quality standards during fabrications.

Features:

• Custom or on call designs are accepted
• Easy to maintain
• Resistance to heat and fire

Applications:

• Energy Meters
• Electronic Circuit Breaker

Additional Information:

• Item Code: SET1606-550-2A
• Production Capacity: 500000 per month

Product Details:

Here Vct is considered as the CT secondary voltage signal required to feed the AtoD converter of uC and it is assumed to be less than absolute maximum rating of input pin of AtoD converter.
Kindly keep Vct = Vout below 1 Volts for accurate reading this implies that lower value of burden resistance helps increase accuracy. Using higher bit ADC increases the precision level. Kindly select at your discretion.

Features:

• Designed and developed as per European Standards IEC : 62053-21 / IS: 13779
• Current Transformer with PC Housing for better insulation and environmental protection.
• Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT

Applications:

• Energy Meters
• Electronic Circuit Breaker
• Current Sensors
• Motor Speed Controllers

Specifications:

• Recommended Burden Resistance (Ru): 25 Ohms @ Vout = 1 Volts
• Maximum Value: 1500 Ohms. (As per Eqn. R = Vct X N / Ip )
• Recommended Burden Resistance (Ra): Maximum Value: 3500 Ohms
• For Analog Interface using bridge rectifier and bulk capacitor
• Insulation – Pri,Sec & Earth : ≥ 1000 M
• Humidity: ≤90%
• Mounting Type / Housing (Optional): Self (Flying) Wire-Without Dabbi

Additional Information:

• Item Code: SET2x2610-2500-100A
• Production Capacity: 500000 per month

Product Details:

Features:

• Designed and developed as per European Standards IEC: 62053-21 / IS: 13779
• Current Transformer with PC Housing for better insulation and environmental protection
• Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT

Applications:

• Energy Meters
• Electronic Circuit Breaker
• Current Sensors
• Motor Speed Controllers

Product Details:

• Recommended Burden Resistance (Ru): 120 Ohms @ Vout = 1 Volts.
• Maximum Value: 252 Ohms. (As per Eqn. R = Vct X N / Ip )
• Recommended Burden Resistance (Ra): Maximum Value: 524 Ohms.
• For Analog Interface using a bridge rectifier and bulk capacitor
• Here Vct is considered as the CT secondary voltage signal required to feed the AtoD converter of uC and it is assumed to be less than the absolute maximum rating of an input pin of the AtoD converter.
• Kindly keep Vct = Vout below 1 Volts for accurate reading this implies that lower value of burden resistance helps increase accuracy.
• Using higher bit ADC increases the precision level.
• Kindly select at your discretion.

Additional Information:

• Item Code: SET2610-1200-10A
• Production Capacity: 500000 per month

Product Details:

Here Vct is considered as the CT secondary voltage signal required to feed the AtoD converter of uC and it is assumed to be less than absolute maximum rating of input pin of AtoD converter. Kindly keep Vct = Vout below 1 Volts for accurate reading this implies that lower value of burden resistance helps increase accuracy. Using higher bit ADC increases the precision level. Kindly select at your discretion.

Features:

• Designed and developed as per European Standards IEC: 62053-21 / IS: 13779
• Current Transformer with PC Housing for better insulation and environmental protection
• Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT

Applications:

• Energy Meters
• Electronic Circuit Breaker
• Current Sensors
• Motor Speed Controllers

Specifications:

• Recommended Burden Resistance (Ru): 25 Ohms @ Vout = 0.8 Volts.
• Maximum Value: 817 Ohms. (As per Eqn. R = Vct X N / Ip )
• Recommended Burden Resistance (Ra): Maximum Value: 1702 Ohms
• For Analog Interface using bridge rectifier and bulk capacitor.
• Insulation – Pri,Sec & Earth: ≥ 1000 M
• Operating & Storage Temp.: -40C ~ +85C
• Humidity : ≤90%
• Mounting Type, Housing (Optional): Self (Flying) Wire-Without Dabbi, Self (Flying) Wire-With Dabbi, PCB Mounting-With Dabbi.

 

Additional Information:

• Item Code: SET2X3106-2500-80A
• Production Capacity: 500000 per month

Product Details:

Here Vct is considered as the CT secondary voltage signal required to feed the AtoD converter of uC and it is assumed to be less than absolute maximum rating of input pin of AtoD converter. Kindly keep Vct = Vout below 1 Volts for accurate reading this implies that lower value of burden resistance helps increase accuracy. Using higher bit ADC increases the precision level. Kindly select at your discretion.

Features:

• Designed and developed as per European Standards IEC: 62053-21 / IS: 13779
• Current Transformer with PC Housing for better insulation and environmental protection.
• Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT.

Applications:

• Energy Meters
• Electronic Circuit Breaker
• Current Sensors
• Motor Speed Controllers

Specifications:

• Recommended Burden Resistance (Ru): 25 Ohms @ Vout = 0.6 Volts
• Maximum Value: 1446 Ohms. (As per Eqn. R = Vct X N / Ip )
• Recommended Burden Resistance (Ra): Maximum Value: 3011 Ohms.
• For Analog Interface using bridge rectifier and bulk capacitor.
• Insulation – Pri,Sec & Earth: ≥ 1000 M
• Humidity: ≤90%
• Mounting Type / Housing (Optional): Self (Flying) Wire

Additional Information:

• Item Code: SET2615-2500-60A
• Production Capacity: 500000 per month

Product Details:

We feel proud to introduce ourselves as the leading organization in this domain, engaged in presenting an excellent grade of 5 AMP. Current Transformer. Due to its high volt range, the transformer is recommended to be used in all weather conditions. Further, the ambient temperature range of the transformer is 15 °C for storage temperature and maximum temperature it can sustain is 75 °C. At our manufacturing unit, our engineers have designed the transformer adhering to European industry standards and using heavy cast metal alloy.

Features:

• Better design and concept
• Alluring design
• Heavy duty

Applications:

• Energy Meters
• Electronic Circuit Breaker

Additional Information:

• Item Code: SET2210-1200-5A
• Production Capacity: 500000 per month

Product Details:

Here Vct is considered as the CT secondary voltage signal required to feed the AtoD converter of uC and it is assumed to be less than absolute maximum rating of input pin of AtoD converter. Kindly keep Vct = Vout below 1 Volts for accurate reading this implies that lower value of burden resistance helps increase accuracy. Using higher bit ADC increases the precision level. Kindly select at your discretion.

 

Feature :

• Designed and developed as per European Standards IEC: 62053-21 / IS: 13779
• Current Transformer with PC Housing for better insulation and environmental protection
• Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT

Applications:

• Energy Meters
• Electronic Circuit Breaker
• Current Sensors
• Motor Speed Controllers

Specifications:

• Recommended Burden Resistance (Ru): 6 Ohms @ Vout = 0.9 Volts
• Maximum Value: 283 Ohms. (As per Eqn. R = Vct X N / Ip )
• Recommended Burden Resistance (Ra): Maximum Value: 590 Ohms
• For Analog Interface using bridge rectifier and bulk capacitor.
• Insulation – Pri,Sec & Earth : ≥ 1000 M
• Humidity: ≤90%
• Mounting Type / Housing (Optional): Self (Flying) Wire-Without Dabbi / Self (Flying) Wire-With Dabbi

 

Additional Information:

• Item Code: SET4511-2000-300A
• Production Capacity: 500000 per month

Product Details:

Here Vct is considered as the CT secondary voltage signal required to feed the AtoD converter of uC and it is assumed to be less than absolute maximum rating of input pin of AtoD converter. Kindly keep Vct = Vout below 1 Volts for accurate reading this implies that lower value of burden resistance helps increase accuracy. Using higher bit ADC increases the precision level. Kindly select at your discretion.

Features:

• Designed and developed as per European Standards IEC: 62053-21 / IS: 13779
• Current Transformer with PC Housing for better insulation and environmental protection.
• Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT.

Applications:

• Energy Meters
• Electronic Circuit Breaker
• Current Sensors
• Motor Speed Controllers

Specifications:

• Recommended Burden Resistance (Ru): 25 Ohms @ Vout = 0.6 Volts
• Maximum Value: 1446 Ohms. (As per Eqn. R = Vct X N / Ip )
• Recommended Burden Resistance (Ra): Maximum Value: 3011 Ohms.
• For Analog Interface using bridge rectifier and bulk capacitor.
• Insulation – Pri,Sec & Earth: ≥ 1000 M
• Humidity: ≤90%
• Mounting Type / Housing (Optional): Self (Flying) Wire

Product Details:

With enriched industrial experience and knowledge, we are providing an excellent range of Battery Charger Transformer.

Product Details:

The Energy Meter Coils, also known as voltage electronic coils we manufacture are designed using latest technology and optimum quality raw material. These voltage electronic coils are available in different technical specifications and test details.

Features:

• Phase Angle
• Minimum Amplitude Error
• Liner Linearity
• Magnetic Stability
• No Saturation Condition
• International Meter Standards
• Shah Electronics manufactures the C.T.s from 5 AMP to 200 AMP
• Capacity with accuracy of class 0.5 & 0.2.

Product Details:

Here Vct is considered as the CT secondary voltage signal required to feed the AtoD converter of uC and it is assumed to be less than absolute maximum rating of input pin of AtoD converter. Kindly keep Vct = Vout below 1 Volts for accurate reading this implies that lower value of burden resistance helps increase accuracy. Using higher bit ADC increases the precision level. Kindly select at your discretion.

Features:

• Designed and developed as per European Standards IEC: 62053-21 / IS: 13779
• Current Transformer with PC Housing for better insulation and environmental protection.
• Variants available in Self Wire (Flying Leads) or PCB Mounting Type CT.

Applications:

• Energy Meters
• Electronic Circuit Breaker
• Current Sensors
• Motor Speed Controllers

Specifications:

• Recommended Burden Resistance (Ru): 25 Ohms @ Vout = 0.6 Volts
• Maximum Value: 1446 Ohms. (As per Eqn. R = Vct X N / Ip )
• Recommended Burden Resistance (Ra): Maximum Value: 3011 Ohms.
• For Analog Interface using bridge rectifier and bulk capacitor.
• Insulation – Pri,Sec & Earth: ≥ 1000 M
• Humidity: ≤90%
• Mounting Type / Housing (Optional): Self (Flying) Wire